💡 Tip: Many of these tools can be hired from local hardware stores or directly from us.

1. Prepare the Base

• Clear the area of grass, roots, rocks, and debris.
• Excavate to a depth of at least 100mm.
• Add a 60mm layer of blue metal dust (crushed rock).
• Use a rake to spread evenly and shape the base.
• Compact the base with a plate compactor until it’s level and solid, ensuring proper water drainage.

2. Trim and Position Your Turf

• Roll out the synthetic turf over the compacted base.
• Trim the edges using a sharp utility knife to fit the space perfectly.
• If using multiple pieces, ensure all blades face the same direction for a consistent look.

3. Join the Turf Sections

• Align turf edges tightly.
• Use our self-adhesive joining tape along the seam to bond the sections.
• Press firmly for a secure, clean join.

4. Secure the Turf

• Use galvanized turf pegs around the perimeter and across the middle sections to hold the turf in place.
• Insert pegs every 30–50cm for best results.

5. Apply Sand Infill

• Spread silica sand infill evenly across the turf surface.
• Recommended: 1 bag per 2–3 sqm (depends on pile height and turf density).
• Sand infill helps:
  • Keep turf blades upright
  • Improve drainage
  • Add weight to prevent movement
  • Increase durability
  • Protect backing from UV damage

6. Groom the Turf

• Use a power broom to brush the turf and work the infill into the base.
• This lifts the blades for a natural appearance and distributes sand evenly.